Before you get started, you'll need a few things:

• A phone/table with the IGNITE mobile app. Both Android and iOS are supported
• Atleast one IGNITE module, up to 6 modules are supported per mobile device.
• Ignitors to convert the electrical signals of the IGNITE module to heat/fire that launch your fireworks.
• Finally, fireworks! And when you think you have enough, go buy more!

IGNITE modules come in two sizes, the i18 and i36 with 18 & 36 cues respectively. Each cue allows you to ignite your fireworks at the specified time during your display.

IGNITE supports up to six modules at a time. Doesn't matter if they are six i18s, i36s or a mix of both.

During setup each module is assigned a color. This is how you will keep them organized, and identify them both in the app and in the field.

In the box you'll get a module as well as the following accessories

• 1x LiPo rechargeable battery
• 1x USB battery charger
• 1x Antenna
• 1x Emergency 9V battery harness

No, the modules don't include ignitors. Ignitors are one time use, and will need to be purchased separately.

Good question, you might think the i18 can only fire 18 ignitors, and the i36 only 36. But you'd be wrong! While each module can only fire 18 or 36 cues, each cue can fire multiple ignitors simultaneously.

So if you want to launch multiple shells or cakes at the same time you only need ONE cue!

Here's the trick, you need an easy way to connect multiple ignitors to a single cue. That's where the muuxBRD QuickSplit comes in. The QuickSplit-4P and 12P are best suited for the IGNITE modules. They will allow you to connect up to 4 or 12 ignitors to a single cue. But don't get to excited there are a couple of caveats.

IGNITE modules can fire two different types of ignitors, Clip On (aka Talon) ignitors or electric match (aka Initiators).

IGNITE modules can only fire 2x Clip On or Talon ignitors at the same time. Or up to 10x electric match or initiators at the same time.

So what that means is with a few QuickSplit boards you can fire way more fireworks from your IGNITE system!

IGNITE recommends Clip On ignitors. They are user friendly, and contain no pyrotechnic material.

More advanced users may choose to use electric match, fuse-tube, firewire, ematch, initiators. While they go by many names they are similar in that they do contain a small amount of pyrotechnic material.

Because electric matches contain some pyrotechnic material they come with some extra precautions and risk. But they also offer some benefits.

Electric matches offer superior instant firing of your fireworks when properly installed. Also, your IGNITE module can fire an INCREDIBLE 10x electric matches simultaneously from a SINGLE cue!

Included in the purchase of your IGNITE firing system is FREE web based show design software.

IGNITE Show Designer

The show designer software will allow you to add fireworks, music and more to a timeline. You can spend as much or as little time as you want tweaking and perfecting your show. If you want more details checkout this video tutorial.

Congrats! When your first display is all perfectly laid out on the timeline you're ready for the next step. You need to get your design from the computer, to your IGNITE app.

From the Shows screen on your IGNITE mobile app you can press SYNC to fetch your latest design and download to your device for show day.

Did you know you can also share your display or use pre-programmed shows from your friends or fireworks vendor?

On the Shows screen of the mobile app you can click Import Show and it will allow you to scan a QR code of the display being shared with you.

No problem! You can use pre-programmed shows from friends, social media, IGNITE dealers, and fireworks vendors.

Why put in the time if someone else has already perfected a show design. Shows are shared using QR codes, to import a show go to Shows screen in your mobile app. Instead of Sync, click Import Show, and you'll be able to scan the QR code with your devices camera.

And just like that you have a fully scripted display ready to fire!